LumaLine Pro TRIAC Dimmable Outdoor Wall Light

LumaLine Pro creates a clean vertical line of light for modern facades, patios, entryways, hallways, and garages. The slim black stainless-steel body combines an integrated LED source with smooth TRIAC wall-dimmer control.

Key features

• Eight available lengths from 60 to 240 cm (23.6 to 94.5 in)
• 10%–100% TRIAC phase-cut dimming; dimming requires a compatible TRIAC wall dimmer, sold separately
• Warm, neutral, and cool light options: 3000K, 4000K, and 6000K
• Supplier-rated IP67 construction for outdoor wall applications
• Black stainless-steel body with a translucent acrylic light diffuser

Specifications

Size, power & light output

Output values are supplier-listed nominal figures. Actual output can vary with input power, dimmer, installation, and operating conditions.

Installation guide

1. Switch off power at the circuit breaker and verify that the circuit is de-energized.
2. Confirm the selected fixture length, mounting clearance, wall structure, and junction-box position before drilling.
3. Secure the mounting bracket to a suitable wall surface or junction box. For a standard US junction box, supplier documentation states that the supplied two-piece cover plate assembles to approximately 4.7 × 4.7 in (12 × 12 cm).
4. Connect line, neutral, and ground only according to the fixture markings, included wiring instructions, and applicable electrical code.
5. Fasten the fixture, check that all outdoor seals and gaskets are correctly seated, and weather-seal the wall penetration as required for the installation surface.
6. For dimming, install a compatible TRIAC wall dimmer. The fixture does not include a dimmer switch.
7. Restore power and test operation from minimum to maximum brightness.

Safety: Hardwired installation should be completed by a qualified electrician in accordance with local code. The instructions supplied with the exact fixture take precedence over this general guide.

Before ordering

• Measure the wall area and verify that the selected length clears doors, trim, rooflines, and other fixtures.
• Confirm the exact model’s electrical requirements and compatibility with your chosen TRIAC dimmer.
• The supplier lists IP67 and certification-related claims; model-level certificates have not been independently verified by Outdoor Lighting. Confirm any project-specific compliance requirement before purchase or installation.

Frequently asked questions

Is LumaLine Pro dimmable?

Yes. The listed variants support approximately 10%–100% TRIAC phase-cut dimming when paired with a compatible wall dimmer. A dimmer is not included and must be purchased separately.

Which color temperature should I choose?

Choose 3000K for a warm residential ambience, 4000K for balanced architectural light, or 6000K for a crisp, cooler appearance.

Can it be installed outdoors?

The supplier rates the fixture IP67. Outdoor performance still depends on correct mounting, intact seals, proper wall-penetration weatherproofing, and installation that follows local electrical code.

How do I choose the right length?

Use the width or height of the door, column, or facade bay as your reference. Check the table above for the wattage and nominal lumen output of each available length.